liquidammonia The DjCCS100 system is a field proven product designed for liquid pressure based or NH3 control. The display console shows application rate in pounds or gallons of product being applied per acre and the bar graph indicates pressure (liquid application) or percentage of maximum flow rate (NH3). The unit is easily programmed and can switch from liquid to NH3 with the push of a button, and is still able to retain the settings for the other product.

Controls liquid and anhydrous ammonia.
Can be used with DjCMS100 for Speed & Area Monitoring.
Optional lift switch can be tied into lift cylinder or three point hitch for hands free ON/OFF.
Non-volatile memory protects programming even when disconnected from battery.
Change rate on-the-go allows the user to determine the amount of increment or decrement from the target application rate every time the + or – button is pushed.

DICKEY-john DjCCS100 Granular

The DjCCS100 granular control system is based on the same field proven design as the DjCCS100 liquid & NH3 controller. The unit displays application rate and the bar graph indicates percentage of maximum flow rate. A low hopper indication will display on the screen when used in conjunction with an optional hopper level sensor. To provide a fully instrumented system, add the DjCMS100.

Controls granular product application.
Works with single or dual drag belt.
Change rate on-the-go allows the user to determine the amount of increment or decrement from the target application rate every time the + or – button is pushed.
Non-volatile memory protects programming even when disconnected from battery.
Can be used with DjCMS100 for Speed & Area Monitoring.

Flow-Trak is a sprayer monitor that provides the information needed to keep your chemical application on track. It helps eliminate waste and achieve more consistent results.

Large, easy-to-read lighted liquid crystal display
Lighted front panel for night use
Application rate, flow rate, total flow, speed, distance and area per hour functions, plus two separate area counters
Push-button run/hold switch
Out-of-range warning light
Optional remote run/hold sensor kit allows for hands-free operation

MT 2400

la2400 Automatically compensates for changing speed to maintain a preset application rate. Designed for use with separate electric boom switches.

For liquid application, plus optional NH3 Kit
Flow-based control
On-the-go rate adjustment
Application rate, flow rate, total flow, speed, distance and area per hour functions, plus two separate area counters
Out-of-range warning light
Lighted liquid crystal display and panel lighting for night use
Optional Remote Run/hold sensor kit allows for hands-free operation

MT 2405F

la2405F Offers the same great features as the MT-2400, with the addition of another boom control.

Flow-based control
On-the-go rate adjustment
Lighted liquid crystal display and panel lighting for night use
Out-of-range warning light
Manual operation available for accurate spot spraying

MT 3405F

la3405F Automatically maintains a preset application rate for liquid application and anhydrous ammonia.

Flow based control for liquid application, also NH3 application with optional NH3 kit
On-the-go rate adjustment
Application rate, flow rate, total flow, speed, distance and area per hour functions, plus two separate area counter
Out-of-range warning light
On/off control for up to five separate boom sections
Lighted liquid crystal display and panel lighting for night use
Optional Remote Run/hold sensor kit allows for hands-free operation

MT 3405M

la3405M Offers all the same great features as the MT-3405 F; but we’ve added modularity!

Flow- or pressure-based control
GPS and PC compatible
Utilities software on CD-ROM
Built-in ON/OFF control for up to 5 separate boom sections
RS-232 connection for variable rate application (VRA)
For liquid and dry application, plus NH3 with optional kit

DjCMS100

monitors (2) Used as a stand alone unit or in conjunction with one of the DjCCS100 control systems, the DjCMS100 is a versatile product. When used with either a radar or magnetic distance sensor the DjCMS100 will accumulate area and display speed. The distance counting feature also allows you to measure field boundaries or other distances. Add a pressure sensor or flow meter, and now you have the ability to accumulate product, display application rate and pressure. Several alarm functions are also available.