John Deere

jdtankmounts (13)

Saddle tanks by Agri-Products are available for most John Deere models. To the left there are links to the different models of John Deere tractors that Agri-Products saddle and front mount tanks are available. If your tractor isn’t listed, contact KSSI for more information.

  • 3000 – 6000 Series•7600 – 7800 Series
  •  8000 Series
  • Wide Track
  • 4 WD

3000 – 6000 Series

 

  •  jdtankmounts (15)900 – 1200 gallon capacity
  •  200, 260, 300, and 400 gallon tanks
  • Good row visibility is provided by parallel side mounts
  • Step ladder provides easy, safe access
  • Heavy 7″ x 7″ x 3/8″ tube supports tank saddle
  • Newly designed side plates eliminate row interference
  • Hi-density tanks are standard
  • 3 year limited warranty on tanks
  • Tanks have 1-1/4″ and 3/4″ outlets

New design on the front mount distributes the load evenly over the entire length of the weight bracket. A heavy steel brace attaches the saddle to the tractor frame. A fitting under the weight bracket keeps the hook set in place. Eight grade-5 bolts secure the saddle to the hook set.

Tubes in place with the bottom bolt in place so that tube can be pivoted into place and the rest of the bolts can be installed.

The saddle is secured to the 7″ x 7″ x 3/8″ tube with two U-bolts. The hollow tube can also be used to house the plumbing.

The under truss distributes the load from the side plates. Allowance has been made for the front drive shaft.

A one step ladder is standard on all tank mounts assuring safe and easy access to the tractor cab.


7600 – 7800 Series

  • jdtankmounts (16)900 – 1200 gallon capacity
  • 200, 260, 300, and 400 gallon tanks
  • Good row visibility is provided by parallel side mounts
  • Step ladder provides easy, safe access
  • Heavy 7″ x 7″ x 3/8″ tube supports tank saddle
  • Newly designed side plates eliminate row interference
  • Hi-density tanks are standard
  • 3 year limited warranty on tanks
  • Tanks have 1-1/4″ and 3/4″ outlets

New design on the front mount distributes the load evenly over the entire length of the weight bracket. A heavy steel brace attaches the saddle to the tractor frame. A fitting under the weight bracket keeps the hook set in place. Eight grade-5 bolts secure the saddle to the hook set.

Tubes in place with the bottom bolt in place so that tube can be pivoted into place and the rest of the bolts can be installed.
The saddle is secured to the 7″ x 7″ x 3/8″ tube with two U-bolts. The hollow tube can also be used to house the plumbing.

The under truss distributes the load from the side plates. Allowance has been made for the front drive shaft.

A one step ladder is standard on all tank mounts assuring safe and easy access to the tractor cab.


8000 Series

 

  •  jdtankmounts (19)900 – 1200 gallon capacity
  •  200, 260, 300, and 400 gallon tanks
  • Good row visibility is provided by parallel side mounts
  • Step ladder provides easy, safe access
  • Heavy 7″ x 7″ x 3/8″ tube supports tank saddle
  • Newly designed side plates eliminate row interference
  • Hi-density tanks are standard
  • 3 year limited warranty on tanks
  • Tanks have 1-1/4″ and 3/4″ outlets

 

The front mount bracket distributes weight. A 7″ X 7″ tube supports the weight of the mount and liquid, heavy braces add rigidity to the mount. Loosening two U-bolts allows for easy removal of the tank & saddle.
Side plate mounted on the tractor. Note that the only projections are the plate tabs the tube bolts to. Stainless steel fender guards protect the fender from damage.
The saddle tube attached with the bottom bolt, ready to be pivoted into place.
Saddle tube bolted in place. 3/4″ bolts secure saddle tube but allow for easy removal.
Saddle is secured to the tube by two U-bolts. Tube can be used to house plumbing.
One step ladder for easy access is standard.
Heavy under truss secures the side plates and adds additional strength


Wide Track

John Deere Wide-Trac Poly Tank Mounts
Available for 8000T Wide-Trac Series

  • 8″ screw on fill lid
  • 450 gallon capacity
  • Does not interfere with row visibility
  • Maintains good weight balance
  • Heavy density tanks feature large access cap at top
  • Tank has bottom end fittings
  • 25 gallon increment marks on tanks
  • 12 gauge steel pan supports tank and heavy plate mounting brackets attached to hard mast and tractor frame
  • Fast and simple installation
  • Works with 16″ track width (Can be used with 24″ track, but not within the manufacture’s recommended clearance.)
  • Available also in stainless steel

John Deere Wide-Trac Poly Outside Tank Mounts
Available For 8000T Wide-Trac Seriesjdtankmounts (14)

  • 800 gallon capacity
  • Works with 16″ or 24″ track width
  • A total capacity of 1250 gallons can be achieved when used with the tanks above.

 


4 WD

John Deere 4-Wheel Drive Hi-Clearance Tanks

  • 200, 300, and 400 gallon tanks
  • Tanks can be located close to the tractor or mounted further out for easier access to engine compartment.
  • Good row visibility is provided by parallel side mounts
  • Saddle tubes and tanks can easily be removed by using an optional four jack set that fits into the end of each tube.
  • Heavy plate member bolt to the tractor frame
  • Four 1″ U-bolts secure the tube to the tractor plate.
  • Saddles are mounted on heavy 7″ x 7″ tube and secured to the tube with 1″ U-bolts.