We carry many different types of pumps. We have just the one to fit your need. Choose from the list below to see our selection.
- Centrifugal
- Diaphragm Pumps
- Electric
- Piston
- Roller
- Transfer Pumps
We have repair kits for all of the above pumps plus most of the major brands. If you have a pump and it just needs repairs contact us. We can also repair them for you!
CENTRIFUGAL
Hypro centrifugal pumps come in many sizes and varieties to fit just about any application. Pump capabilities range up to 190 gpm and 190 psi. They are good for spraying or transfer applications. The broad versatile line includes models with rugged housing of cast iron and polypropylene that are Ready for Roundup. Polypropylene pumps are lightweight and provide maximum resistance to corrosive chemicals such as acid fertilizers. You can choose from gear, belt, DC clutch, and hydraulic motor drives, as well as models that are closed-coupled to gasoline engines.
Below you will find links to the different types of centrifugal pumps we have.
- Cast Iron – Gear Driven
- Cast Iron – Pedestal Mount
- Cast Iron – Pedestal Mount and Clutch Driven
- Cast Iron – Hydraulically Driven
- Polypropylene
- Cast Iron and Polypropylene – Belt Driven
- Cast Iron – Turbine
- Noryl
DIAPHRAGM PUMPS
Diaphragm pumps are some of the best pumps available for agricultural use. They are a direct displacement pump that gives you greater accuracy when applying chemicals. We have different models for different needs. Browse the links below to find out more.
ELECTRIC
Shurflo
Model 2088
- Pressure demand switch for automatic operation.
- Can be run dry without causing damage to the pump.
- Self priming up to a distance of 12 feet.
- Available in 12 V DC, 24 V DC, or 115 V AC.
Model 8000
Positive displacement, three chamber diaphragm pump- Permanent magnet motor
- Maximum liquid temperature is 180 degrees F (82 degrees C)
- Self priming up to 8 feet
- 1/2″ NFPT ports
- Capable of 100 psi with an adjustable automatic demand switch
____________________________
Hypro
Series 9700B Aqua-Tiger
12-volt DC motor drive- Max flow: 19 gpm
- Max pressure: 7 psi
- Port sizes: 3/4″ NPT inlet, 3/4″ outlet
- Max current draw: 5.5 amps
- Housing: bronze
- Impeller: bronze
- Seal: lip-type Viton
Series 9940-9751 NRL
Noryl, close-occupied, AC motor driven, centrifugal pump- Max flow: 44 gpm
- Max pressure: 30 psi
- Max speed: 3450 rpm
- Port sizes: 1-1/2″ NPT inlet, 1-1/2″ NPT outlet
- Housing: Noryl
- Impeller: Noryl
- Motor: 3/4 hp 115/208-230V AC
- Shaft seals: non-corrosive, thermo-plastic, mechanical, stationary
Series 9940-9753NRL
Noryl, close-occupied, AC motor driven, centrifugal pump- Max flow: 88 gpm
- Max pressure: 30 psi
- Max speed: 3450 rpm
- Port sizes: 1-1/2″ NPT inlet, 1-1/2″ NPT outlet
- Housing: Noryl
- Impeller: Noryl
- Motor: 1-1/2 hp 115/208-230V AC
- Shaft seals: non-corrosive, thermo-plastic, mechanical, stationary
PISTON
The piston pumps are used in a variety of spraying and pressure cleaning applications, as well as hydrostatic testing. These heavy-duty pumps are ideal for fluid handling of water and nonabrasive or general use chemicals.
All pumps are constructed from cast iron materials. They feature stainless steel valves and ball bearing, leather or fabric-reinforced Buna-N or straight Buna-N cups.
You can choose from a variety of drive systems to include: belt and pulley, 540 rpm PTO, gasoline engine or electric motor.
These pumps are available in a variety of flow and pressure ranges up to a maximum of 10 gpm and 1000 psi, with maximum fluid temperatures of 140°F (piston pumps) and 180°F (plunger pumps).
All of the Hypro piston and plunger pumps share these quality features:
- Nonabrasive and general use chemical compatibility
- Compact, lightweight and easy to install
- Replaceable leather cups for insecticides, herbicides and aromatic solvents
- Replaceable Buna-N and fabric reinforced Buna-N cups for water, soap, and detergent solutions
- They are bi-rotational
- Self-priming operation (piston pumps)
ROLLER
Roller pumps are the most popular pumps worldwide for agricultural tasks. These low cost, highly versatile pumps are used for spraying and transferring a variety of fluids including insecticides, herbicides, fungicides, emulsives, aromatic solvents, liquid fertilizers and may other nonabrasive liquids. All pumps (excluding the 1200 Series) are available in three materials: cast iron, Ni-resist, or Silver Series™. On average the Silver Series pumps last up to 2-1/2 times longer* than the competition.
These pumps contain rollers that resolve inside the pump housing to force the spray solution through the outlet to the nozzle. Hypro roller pumps are easily adaptable to PTO, has engine or electric motor drives. The pumps operate efficiently at PTO speeds of 540 and 1000 rpm. Pressure ranges are up to 300 psi with flow rates of 2-74 gpm.
*Based on independent laboratory tests.
Hypro roller pump features include:
- Housing available in cast iron, Ni-Resist or Silver Series
– Ni-Resist is a high nickel content alloy for better corrosion resistance
– Silver Series has a custom alloy that provides the best corrosion resistance and is ready for use with Roundup® - Self-priming operation; roller pumps should not be run dry
- Adaptable to PTOs or gas engines
- Standard seals are Viton or Buna-N (leather optional)
- Standard Super Rollers provide the chemical resistance of nylon and the life of polypropylene
The three pumps shown above were photographed after being tested with a 30:1 mix of water and Roundup® herbicide. The Ni-Resist and cast iron indicate damage from pitting and corrosion, but the Silver Series is in like-new condition after more than 1000 hours of use.
TRANSFER PUMPS
SCOT
Gasoline Engines
- Capacities to 350 GPM
- Heads to 80 PSI
- 3.5 – 13 HO
- 1″ and 3″ NPT
- All iron construction
- Stainless Steel Shaft Sleeve
- Mechanical Seal Viton – Ceramic – Stainless Steel
- Severe duty seal available
- Heavy duty base plate
Diesel Engines
- Yanmar diesel engine
- Lightweight
- Single cylinder, 4 cycle
- Air cooled
- 5.5 qt fuel tank
HYRPO
Series 1536 and 1539
Series 1536-SP and 1539-SP SELF-PRIMING
Includes Models:
1536 and 1539 (Model 1536 includes the engine base)
1536-SP and 1539-SP (Model 1536-SP includes the engine base)
- Close-coupled, gas engine driven
- Max flow rate: 104 gpm 92 gpm SELF-PRIMING
- Max pressure: 70 psi 65 psi SELF-PRIMING
- Port sizes: 1-1/2″ NPT inlet, 1-1/4″ NPT outlet
2″ NPT inlet, 2″ NPT outlet SELF-PRIMING - 5 hp Briggs & Stratton gas engine
Series 1537 and 1540
1537-SP and 1540-SP SELF-PRIMING
Includes Models:
1537 and 1540 (Model 1537 includes the engine base)
1537-SP and 1540-SP (Model 1537-SP includes the engine base)
- Close-coupled, gas engine driven
- Max flow rate: 110 gpm
98 gpm SELF-PRIMING - Max pressure: 80 psi
70 psi SELF-PRIMING - Port sizes: 1-1/2″ NPT inlet, 1-1/4″ NPT outlet
2″ NPT inlet, 2″ NPT outlet SELF-PRIMING - 5.5 hp Honda gas engine
Series 1550, 1550SP & 1550-BSP
- Close-coupled, gas engine driven
- Max flow rate: 150 gpm
146 gpm (SP and BSP) - Max pressure: 140 psi
130 psi (SP and BSP) - Port sizes: 2″ NPT inlet, 1-1/2″ NPT outlet
2″ NPT inlet, 2″ NPT outlet (SP)
2″ BSP inlet, 2″ BSP outlet (BSP) - Shaft seal: Viton
- 9 hp Honda gas engine